Mouse over image to zoom
INTERMEDIATE LIFT-PUMPING STATION COMPLIANT WITH EN 12050 - 1 STANDARD
Collection and lift-pumping of wastewater from collective residential, tertiary and commercial buildings.
TECHNICAL SPECIFICATIONS
Effective volume of up to : 500 L
Manometric head of up to : 38 mWC
Fluid temperature limit : +40°C
Start-up frequency : Recommended: 20/h max.
Maximum particle size : 6 mm
Effluent inlet : DN 150
DN discharge port: : 11/2"
DN vent port: : DN 100
Mains supply : 1~230 V, 3~400 V, 50 Hz
P2 power : Up to 2 x 2.5 kW
Normal/Back-up configuration : 1 or 2 pumps
Regulation mode : Fixed speed
APPLICATIONS
Collection and lift-pumping of wastewater from collective residential, tertiary and commercial buildings.
BENEFITS
- Energy savings
Control by variation of level
- Easy installation
Compact product
Up to 4 water inlet connections available
Buried installation 100% tight to odours, gases and liquids
- Easy maintenance
Connection for cleaning out the discharge piping
Automatic operation
Easily removable suspended pump
- System protection
Regulation of level by EAPS piezometric detector or environmentally-friendly level controller
No holes in the lower part of the tank
Corrosion-proof product
Stabilising fins to withstand pressure of flood waters
DESIGN
- Motor
2-pole asynchronous technology motor with 304 or 316 L stainless steel casing according to model
Integral motor protection via temperature sensor
Reinforced bearings
- Hydraulics
Polyurethane and cast-iron construction
Grinding hydraulics. On demand: vortex or single-channel hydraulics
Double sealing with oil bath
- Tank
Medium-density, corrosion-resistant polyethylene: 1100 L
Stainless steel discharge pipework, ball valves, full-flow valves, pump-lifting chains, float-switch mounts and suspension hook