TECHNICAL SPECIFICATIONS

Effective volume of up to : 500 L
Manometric head of up to : 38 mWC
Fluid temperature limit : +40°C
Start-up frequency : Recommended: 20/h max.
Maximum particle size : 6 mm
Effluent inlet : DN 150
DN discharge port: : 11/2"
DN vent port: : DN 100
Mains supply : 1~230 V, 3~400 V, 50 Hz
P2 power : Up to 2 x 2.5 kW
Normal/Back-up configuration : 1 or 2 pumps
Regulation mode : Fixed speed

APPLICATIONS

Collection and lift-pumping of wastewater from collective residential, tertiary and commercial buildings.

BENEFITS

• Energy savings
  Control by variation of level
• Easy installation
  Compact product
  Up to 4 water inlet connections available
  Buried installation 100% tight to odours, gases and liquids
• Easy maintenance
  Connection for cleaning out the discharge piping
  Automatic operation
  Easily removable suspended pump
• System protection
  Regulation of level by EAPS piezometric detector or environmentally-friendly level controller
  No holes in the lower part of the tank
  Corrosion-proof product
  Stabilising fins to withstand pressure of flood waters

DESIGN

• Motor
  2-pole asynchronous technology motor with 304 or 316 L stainless steel casing according to model
  Integral motor protection via temperature sensor
  Reinforced bearings
• Hydraulics
  Polyurethane and cast-iron construction
  Grinding hydraulics. On demand: vortex or single-channel hydraulics
  Double sealing with oil bath
• Tank
  Medium-density, corrosion-resistant polyethylene: 1100 L
  Stainless steel discharge pipework, ball valves, full-flow valves, pump-lifting chains, float-switch mounts and suspension hook